See all products from Wenko
Wenko Capri Vacuum-Loc Towel Rail
Availability:
Out Of Stock
About Product
- Size :58 x 7 x 6 cm
- Material:Metal - Stainless steel
Read full description
Description
- Mounting the Vacuum-Loc system is so easy and is done in only a few steps.
- Step 1: Cleaning the surface The selected surface must first be cleaned with a clean, damp cloth. Here it is important that the subsurface is completely dry and above all free from grease when mounting. Therefore, bathroom or household cleaning agents should not be used for pre-cleaning.
- Step 2: Fixing the vacuum adapter To attach to the desired surface, simply remove the cap on the front and the protective film of the back of the vacuum adapter. The Vacuum-Loc is firmly fixed in the desired position with the red spot facing upwards.
- Step 3: Generating a vacuum Press the pump against the Loc and pull out the pump piston until a loud plop is heard. Remove the pump from the Loc, attach the pump piston again and repeat the procedure 3 times.
- Step 4: Can be immediately subjected to loads After the fourth time of applying the pump piston, the adapter can be immediately subjected to loads and the desired accessory can be hung on. The Vacuum Locs can be re-positioned at any time and can be removed without leaving any residues. The Vacuum-Loc system has a European patent protection and ensures a firm hold. Each mounting Loc can be permanently subjected to a tensile force of up to 33 kg. This is how the exerted force is described, which pulls on the mounting Loc in horizontal direction, towards the force generator. . Thus guarantee does not restrict your statutory guarantee rights.
Product Code: 15572
Technical Details
| Dimensions and Capacity | |
| Overall Width | 58 |
| Overall Height | 7 |
| Overall Depth | 6 |
| Product Type | |
| Accessory Type | Towel Rail |
| Material & Finish | |
| Material | Metal |
| Finish | Stainless steel |
There are no reviews yet, be the first to share your opinion
